Our US Testing & Certifications Capabilities »
- NFPA 496 Purged and Pressurized Enclosures for Electrical Equipment
- UL698 Industrial Control Equipment for Use in Hazardous (Classified) Locations
- UL913 Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division I, Hazardous (Classified) Locations
- UL1203 Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations-Third Edition
- ANSI/ISA 12.12.01 Nonincendive Electrical Equipment for Use in Class I & II, Division 2 & Class III, Divisions I & 2 Hazardous
- UL60079-0 Electrical Apparatus for Explosive Gas Atmospheres Part 0: General Requirements
- UL60079-1 Electrical Apparatus for Explosive Gas Atmospheres Part 1: Flameproof Enclosures “d”
- UL60079-11 Electrical Apparatus for Explosive Gas Atmospheres Part 11: Intrinsic Safety “i”
- UL60079-15 Electrical Apparatus for Explosive Gas Atmospheres Part 15: Electrical Apparatus with Type of Protection “n”
Read about how UL1604 was replaced by ANSI/ISA 12.12.01-2000, and the key differences between the standards.
Our Canada Testing & Certification Capabilities »
- ICES 003 Digital Apparatus
- CSA C22.2 No 3 Electrical Features of Fuel-Burning Equipment
- CSA C22.2 No 25 Enclosures for Use in Class II Groups E, F, and G Hazardous Locations
- CSA C22.2 No 30 Explosion-Proof Enclosures for Use in Class I Hazardous Locations Industrial Products
- CSA C22.2 No 157 Intrinsically Safe and Non-Incendive Equipment for Use in Hazardous Locations; Consumer and Commercial Products
- CSA C22.2 No 213 Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations Industrial Products
- CSA E60079-0 Electrical Apparatus for Explosive Gas Atmospheres Part 0: General Requirements
- CSA E60079-1 Electrical Apparatus for Explosive Gas Atmospheres Part 1: Flameproof Enclosures “d”
- CSA E60079-2 Electrical Apparatus for Explosive Gas Atmospheres Part 2: Pressurized Enclosures “p”-Second Edition
- CSA E60079-7 Electrical Apparatus for Explosive Gas Atmospheres Part 7: Increased Safety “e”-First Edition
- CSA E60079-11 Electrical Apparatus for Explosive Gas Atmospheres Part 11: Intrinsic Safety “i”
- CSA E60079-15 Electrical Apparatus for Explosive Gas Atmospheres Part 15: Electrical Apparatus with Type of Protection “n”
Our ATEX/IECEx Testing & Certifications Capabilities »
- EN/IEC 60079-0 Electrical Apparatus for Explosive Gas Atmospheres Part 0: General Requirements
- EN/IEC 60079-1 Electrical Apparatus for Explosive Gas Atmospheres Part 1: Flameproof Enclosures “d”
- EN/IEC 60079-2 Electrical Apparatus for Explosive Gas Atmospheres Part 2: Pressurized Enclosures “p”-Second Edition
- EN/IEC 60079-7 Electrical Apparatus for Explosive Gas Atmospheres Part 7: Increased Safety “e”-First Edition
- EN/IEC 60079-11 Electrical Apparatus for Explosive Gas Atmospheres Part 11: Intrinsic Safety “i”
- EN/IEC 60079-15 Electrical Apparatus for Explosive Gas Atmospheres Part 15: Electrical Apparatus with Type of Protection “n”
- EN/IEC 60079-28 Electrical Apparatus for Explosive Gas Atmospheres Part 28: Protection of Equipment and Transmission Systems Using Optical Radiation
- EN/IEC 60079-31 Electrical Apparatus for Explosive Gas Atmospheres Part 31: Equipment Dust Ignition Protection by Enclosure “t”
- EN/IEC 61000-1 Electromagnetic Compatibility, Equipment With Regard to Electromagnetic Phenomena
- EN/IEC 61000-2 Electromagnetic Compatibility, Compatibility Levels for Low-Frequency Conducted Disturbances
- EN/IEC 61000-3 Electromagnetic Compatibility, Limits for Harmonic Current Emissions
- EN/IEC 61000-4 Electromagnetic compatibility, Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields
- EN/IEC 61000-6 Electromagnetic Compatibility, Immunity for Residential, Commercial and Light-Industrial Environments
- EN/IEC 61326-1 Electrical Equipment for Measurement, Control and Laboratory Use
